MASKFORCE CONSORTIUM PRODUCES REUSABLE FACE MASKS FOR FRONT LINE WORKERS; BRIGGS & STRATTON CORPORATION LEADS FILTRATION EFFORTS



MILWAUKEE, WI (May 1, 2020) – Briggs & Stratton Corporation continues to be humbled by the heroic acts of the healthcare professionals who are working on the front lines of the COVID-19 pandemic, and the Company is proud to be a part of a MaskForce consortium that has designed, developed and produced a reusable face mask with disposable filters to protect these individuals. 

The MaskForce face mask - which is temporarily authorized by the FDA under an emergency use authorization for use by healthcare professionals to help prevent the spread of infection or illness during the COVID-19 pandemic – can be sanitized and reused, unlike most face masks which are designed to be discarded after a single use. Its filters, however, are intended to be disposed of after every eight hours of wear, further extending the life of the mask.  

Because of its expertise in air filtration for its engines, Briggs & Stratton Corporation led the consortium’s efforts to identify and source candidate filter materials found outside of the traditional medical supply chain given the extreme shortages. A team of Briggs & Stratton employees conducted more than 250 flow resistance and filtration efficiency tests on Briggs & Stratton equipment to evaluate materials that will provide the breathability, quality of filtration and protection needed by medical professionals and first responders when caring for COVID-19 patients. The team presented its recommendations to the consortium, which ultimately selected the H&V Technostat® 3300 filter element for its final MaskForce design. 

“Creating innovative products that make work easier and improve lives is the mission we live by at Briggs & Stratton; so naturally, when presented with the opportunity to use our expertise in a way that can protect the lives of front line workers, our employees met the challenge head-on,” said Todd Teske, Chairman, President and CEO of Briggs & Stratton Corporation. “We are honored to be a part of the MaskForce consortium and my thanks goes out to Husco for leading the effort as well as to each and every organization that played a role in bringing this to life.”

The mask is priced close to cost, with any profits in 2020 reinvested back into the community. In addition to accelerating production of the current model, a smaller form-factor mask is under development. The MaskForce face mask is temporarily authorized pursuant to an FDA emergency use authorization and is actively pursuing NIOSH N95 certification.

About MaskForce

The MaskForce consortium began when more than 50 professionals representing 25 Milwaukee-area manufacturers, first responders, educational institutions and healthcare organizations gathered together with the shared goal of developing a reusable face mask to help address the nationwide health crisis caused by the COVID-19 pandemic. Led by Husco, and through the guidance and input of these organizations, the goal was achieved in just four weeks. For additional information, visit https://www.maskforce1.com/.

Supporters and partners

  • Technical partners (design, validation, testing, tooling & manufacturing): Briggs & Stratton Corporation, Protolabs, Midwest Composites, Rexnord, Mastergraphics, Brooks Stevens, PTC
  • Financial Support (physical materials or financial support): Briggs & Stratton Corporation, New Berlin Plastics, Rockwell Automation, Quad/Graphics, A.O. Smith, Sharp Packaging
  • Sub Suppliers (supplying products or services to MaskForce): New Berlin Plastics, Savage Solutions, Imperial, Milcut, Pentair, Quarles & Brady
  • Supporters (support to aid the progress of the project): Congressman Mike Gallagher, Senator Ron Johnson’s office, Froedtert, Medical College of Wisconsin, Children’s Wisconsin, Milwaukee Fire Dept., Lisbon Fire Dept., City of Waukesha Fire Dept., University of Wisconsin-Milwaukee, Marquette University, Concordia University, University of Wisconsin-Madison

Media Contact: 

Rick Carpenter
Briggs & Stratton Corporation
414.259.5916
carpenter.rick@basco.com

About Briggs & Stratton Corporation:

Briggs & Stratton Corporation (NYSE: BGG), headquartered in Milwaukee, Wisconsin, is focused on providing power to get work done and make people's lives better. Briggs & Stratton is the world’s largest producer of gasoline engines for outdoor power equipment, and is a leading designer, manufacturer and marketer of power generation, pressure washers, lawn and garden, turf care and job site products through its Briggs & Stratton®, Simplicity®, Snapper®,  Ferris®, Vanguard®, Allmand™, Billy Goat®, Murray®, Branco® and Victa® brands. Briggs & Stratton products are designed, manufactured, marketed and serviced in over 100 countries on six continents. For additional information, please visit www.basco.com and www.briggsandstratton.com.

Legal disclaimer:
At this time, the MaskForce face mask has not been FDA cleared or approved. The MaskForce product has been authorized by FDA under an EUA for use as source control by the general public as well as by health care personnel in healthcare settings in order to help prevent the spread of infection or illness during the COVID-19 pandemic. The MaskForce face mask is authorized only for the duration of the declaration that circumstances exist justifying the authorization of the emergency use of medical devices, including alternative products used as medical devices, during the COVID-19 outbreak, under section 564(b)(1) of the Act, 21 U.S.C. § 360bbb-3(b)(1) unless the authorization is terminated or revoked sooner.