Check the Oil in a Briggs & Stratton Engine
Posted in Lawn Mower Engines
Want to get the most out of your Briggs & Stratton lawn mower engine? Practice regular engine maintenance to ensure a long engine lifespan. One component of good small engine maintenance is checking the engine oil level prior to each start. New small engines don’t often come with oil added. Be sure to add oil—available in Briggs & Stratton’s parts store—before firing up your lawn mower for the first time.
To begin, make sure your lawn mower, pressure washer, snow blower, or other outdoor power equipment is on a level surface.
- Locate the dipstick cap, usually in yellow or black and embossed with an oil indicator.
- Remove the dipstick cap by turning counter-clockwise and then wipe it down with a clean rag to ensure an accurate reading.
- Reinsert the dipstick by applying pressure and turning clockwise before removing it again and taking a reading. The oil level should be between the Full and Add indicators.
- If levels are low, add or change the lawn mower oil before checking the oil level again.
- Continue this process until your reading indicates Full.
Briggs & Stratton Operator’s Manuals
Before completing engine maintenance, always consult your operator’s manual. Misplaced It? View Briggs & Stratton operator’s manuals online.
Oil Recommendations for Small Engines
The type of oil to be used in your Briggs & Stratton small engine varies by the piece of equipment and the conditions it’s being run in. Check out Engine Oil Recommendations by Briggs & Stratton to learn how oil type varies for snow blowers, tractors, lawn mowers, and more.