REGION:
LANGUAGE:

Adjustable Spray Wand (6202WEB)

Briggs and Stratton Adjustable Spray Wand

Part Number: 6202WEB

Simply twist for a full range of spray patterns from pin-point to wide fan (0 – 40 degrees). Easily adjust pressure from high to low for applying cleaning solutions. For pressure washers up to 3200 PSI and connects to M22 Spray Gun Fittings.

Price
$26.05
Quantity

Will this fit model 20239?

Asked by: Inkman
Yes, this will fit your unit.
Answered by: Tracey_BriggsStratton
Date published: 2015-08-28

Will 6202WEB wand fit a Model 020358 Rev 00 B & S power waher

Asked by: ccfraime
Yes, this will fit your unit.
Answered by: Tracey_BriggsStratton
Date published: 2015-07-23

Will this fit model number WGV1721

Asked by: Kong
WGV1721 is not a Briggs model number. We can only comment on Briggs units.
Answered by: Nicole_BriggsStratton
Date published: 2015-06-18

will this fit a Spped Clean 2000PSI?

Asked by: KenG
To locate any information on your unit, you will first need the model and revision number. Please see the following FAQ for assistance in locating these numbers: http://bit.ly/17rzznN Once you have this information you can find manuals and parts listings for the unit here: http://bit.ly/12pIs1I Select (PRESSURE WASHER, PORTABLE GENERATOR, STANDBY GENERATOR, OUTBOARD, SNOWTHROWER) as your product type. Enter the model number as directed.
Answered by: Nicole_BriggsStratton
Date published: 2015-04-20

Does this wand have quick connect?

Asked by: Gabbyi
No, the one end screws into the gun and the other end have the adjustable nozzle that cannot be removed.
Answered by: Nicole_BriggsStratton
Date published: 2015-03-24

I have a Brute 2000 psig Pressure Washer, Model No. 020290, Rev 02, Serial No. 1014811499. I need a replacement Adjustable spray wand and their are no part numbers in the operators manual, Will this one work (6202WEB)?

Asked by: Rick 1
Yes, this will work with your unit.
Answered by: Nicole_BriggsStratton
Date published: 2015-01-19

my adjustable spray wand seems to be clogged. water wont come out after 10 months idle. how do you unclog it

Asked by: edayaocruz
Soak the nozzle in warm soapy water. Once you have it soaked, then take a paper clip and clean out the nozzle orifice.
Answered by: Nicole_BriggsStratton
Date published: 2015-01-05

I have an old Generac 21000 PSI model # 61974.  I need a new wand.  The number is 188792HGS.  I can't seem to find it anywhere.  Do you have it or one that will work?

Asked by: Lincoln
The new part number for your wand is 205015CGS and it can be purchased here: http://bit.ly/11hnaSH
Answered by: Nicole_BriggsStratton
Date published: 2014-04-14
  • 2015-08-29T07:31CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_33BF8A17-21D3-4395-86C1-A1136E345433, PRD, sort_recentQuestionsFirst
  • clientName_BriggsStratton

0 Items in Your Cart

Estimated Price: 0.00