REGION: LANGUAGE:
My Account Briggs & Stratton My Cart (0)
Frequently Asked Questions

To search the Frequently Asked Questions (FAQs), enter your search terms or questions in the box below. Not sure what to search for, browse by category by clicking the Browse tab. If you still need help, you can submit your question by clicking the Ask a Question tab. Our Answer Center will respond to your question within 3 business days.

Search Frequently Asked Questions

Electric Pressure Washer Storage Procedures

How do I store my electric pressure washer?

GENERAL STORAGE TIPS
Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and “freeze” pump action.

  1. Flush detergent system by lifting cleaning tank lid, removing tank from pressure washer, and dumping solution from tank.

  2. Rinse cleaning tank out with fresh clean water. Fill tank with clean water.

  3. Run pressure washer with adjustable nozzle set for low pressure. Flush for one or two minutes.

  4. Dump remaining water out of cleaning tank. Push tank back into pressure washer base. Reinsert detergent hose and secure tank lid on tank.

  5. Turn master ON/OFF switch to OFF and turn off water supply. Point gun in a safe direction, press trigger lock (red button), and squeeze trigger to relieve trapped pressure. After a few moments, release trigger on spray gun.

  6. Disconnect hose from spray gun. Drain water from hose, gun, and nozzle extension. Use a rag to wipe off the hose.

  7. Rewind high pressure hose onto hose reel.

  8. Store unit in a clean, dry area that is protected from freezing temperatures.

  9. Cover unit with a suitable protective cover that does not retain moisture.

PLEASE NOTE: Prior to storage, we recommend the use of Pressure Washer Pump Saver for certain electric pressure washer models. This unique anti-freeze and lubricant protects pistons and seals from damage during storage. To determine if Pump Saver is recommended for use in your equipment, and for maintenance and storage instructions specific to your model, please refer to your electric pressure washer’s Operating Manual.

Back to Search Results

Our user community provides a place for users to ask and answer questions of one another. Our staff also participates in this community on a regular basis. Please note that your question may take more than 24 hours to appear. If you are in need of an immediate answer please review our frequently asked questions or contact a local service dealer .

* Indicates a required field.

Please complete the form below to contact us with your question. Provide as much information as possible. We make every effort to personally answer all questions within 3 BUSINESS days. If you are in need of an immediate answer please review our frequently asked questions or contact a local service dealer.

* Indicates a required field.





  • Enter any equipment model numbers you may have


  • Look for STAMPED B&S ENGINE NUMBERS


    STAMPED - YYMMDDxx Identifies Manufacture date


  • 5HP=5, 18-1/2=18.5, 25=25.00


    Series (3 digits) or Torque (ft. lbs)


  • Quantum, Intek, Classic, Sprint, etc.


    Manufacturer of the Tractor, Generator, Lawn mower, etc.


  • What kind of product is the engine coupled to?


    Where was the equipment purchased?


  • When product was purchased. Format: mm/dd/yyyy.

Personal Information












  •  


  • Zip + 4 xxxxx-xxxx Canada use xxx xxx format




  • format: xxx-xxx-xxxx  




  • Would you like to create an account with us?


    Would you like to receive updates and other info from us?




0 Items in Your Cart

Estimated Price: 0.00