Air Filter Pre-Cleaner Installation Instructions
Service Part No. 493537S / DIY Part No. 5064
FITS ENGINES:
8.25-15.75 ft-lbs Gross Torque†, 825-1575 Series™
3.5-6.75 Gross HP/CV‡ Quantum®
5.5-7.0 Gross HP/CV‡ Horizontal Shaft
5.5-11.0 Gross HP/CV‡ OHV/Intek™
Use with Part No. 5043 Air Filter Cartridge
1. Remove air filter cover screw
2. Remove air filter cover
3. Remove air filter cartridge and pre cleaner
4. Clean any debris from base assembly then install new parts in reverse order.
NOTICE: Tabs must be visible through slots to ensure proper installation. Improper installation will cause damage to engine.
See operating manual for air filter maintenance information.
†All power levels are stated gross torque per SAE J1940 as rated by Briggs & Stratton.
‡All power levels are stated gross HP per SAE J1940 as rated by Briggs & Stratton.
