REGION: LANGUAGE:
Heading c

To search the Frequently Asked Questions (FAQs), enter your search terms or questions in the box below. Not sure what to search for, browse by category by clicking the Browse tab. If you still need help, you can submit your question by clicking the Ask a Question tab. Our Answer Center will respond to your question within 3 business day s.

Search Frequently Asked Questions

Storing Your Equipment

What should I do to store my equipment for the season?

Protect Your Investment

Perform some simple seasonal storage and startup maintenance in the spring, fall or whenever you store your equipment for prolonged periods of time. 

Equipment Storage Check List

Fuel

Top off the fuel tank before storing. 

Filling the tank helps prevent moisture from condensing in your fuel tank, and stops rust and scale before it starts.

Before you fill up, add Briggs & Stratton Fuel Stabilizer to the fuel*, then run the engine for a few minutes to circulate the additive through the carburetor. The fuel stabilizer will help prevent gum from forming in the fuel system or on essential carburetor parts. 

* Note: if you choose Not to use the Briggs & Stratton Fuel Stabilizer, or if the engine is using fuel-containing alcohol, such as gasohol, remove all fuel from the tank and run the engine until it stops from lack of fuel. 

Oil

While the engine is still warm, change the oil and the oil filter (if equipped). 

Briggs & Stratton 4-cycle motor oil is through your local dealer or retailer.

Battery

Disconnect the negative battery cable from the battery terminal, on units so equipped. 

Remove the battery. Your battery should be stored in a cool, dry place. 

Clean the battery terminals using the Briggs & Stratton Battery Terminal Cleaner, and coat all terminals with the Briggs & Stratton Terminal Protector.

Cleaning Your Equipment

Don’t store your engine dirty. Clean the engine surface of debris, chaff or grass. 

With the spark plug lead removed from the engine, use a garden hose to wash away any residual grass clippings. 

Once the majority of the grass clippings have been removed, it will be easier to identify a clump of grass that may be interfering with blade motion. 

Using a wooden stick or other implement other than your hands and feet, remove the offending material and wash the deck thoroughly.


Back to Search Results

Please complete the form below to contact us with your question. Provide as much information as possible. We make every effort to personally answer all questions within 3 BUSINESS days. If you are in need of an immediate answer please review our frequently asked questions or contact a local service dealer.

* Indicates a required field.





  • Enter any equipment model numbers you may have


  • Look for STAMPED B&S ENGINE NUMBERS


    STAMPED - YYMMDDxx Identifies Manufacture date




  • Series (3 digits) or Torque (ft. lbs)


  • Quantum, Intek, Classic, Sprint, etc.


    Manufacturer of the Tractor, Generator, Lawn mower, etc.


  • What kind of product is the engine coupled to?


    Where was the equipment purchased?


  • When product was purchased. Format: mm/dd/yyyy.

Personal Information












  •  


  • Zip + 4 xxxxx-xxxx Canada use xxx xxx format




  • format: xxx-xxx-xxxx  




  • Would you like to create an account with us?


    Would you like to receive updates and other info from us?




0

: 0.00