Model 20

Documents

Description	Wrench / socket size	Torque
A/C Support Screw (Cartridge)	3/8"	55 in-lbs (6.2 Nm)
A/C backplate (nuts to carb studs, panel & cartridge a/c)	7/16"	55 in.lbs (6.2 Nm)
Alternator (stator)	_"	20 in.lbs. (2.2 Nm)
Armature	5/16"	25 in.-lbs (2.8 Nm)
Blower Housing	3/8"	85 in-lbs (9.6 Nm)
Carburetor Studs (to cyl head)	E-5	90 in.lbs. (10.2 Nm)
Connecting Rod	5/16"	100 in.lbs(11.2 Nm)
Control Bracket to cylinder	3/8"	100 in.lbs (11.3 Nm)?
Crankcase Cover	_"	200 in.lbs. (22.6 Nm)
Cylinder Shield	_"	35 in.lbs. (3.9 Nm)
Flywheel	1 1/8"	110 ft-lbs (149.1 Nm)
Flywheel Fan	_"	60 in-lbs (6.8 Nm)
Fuel Tank	3/8"	95 in-lbs (10.7 Nm)
Governor Nut	3/8"	40 in.lbs (4.5 Nm)
Head Bolts	_"	220 in.lbs (25.0 Nm)
Muffler Bolts (exhaust Port)	_"	165 in-lbs (18.6 Nm)
(bracket)	3/8"	120 in-lbs (13.6 Nm)
Muffler Guard	5/16"	30 in.lbs (3.4 Nm)
Muffler Deflectors	_"	30 in.lbs (3.4 Nm)
Oil Drain Plugs	3/8" Square Drive (internal)	125 in.lbs.(14.0 Nm)
Oil Fill plugs		40 in-lbs (4.5 Nm)
Oil Fill Tube	5/16"	20 in-lbs (2.3 Nm)
Oil Minder Electronics Box	_"	40 in-lbs (4.5 Nm)
Oil Minder Float	5/16"	30 in-lbs (3.4 Nm)
Rewind	5/16"	30 in.lbs (3.4 Nm)
Rocker Arm	8mm	100 in.lbs. (11.2 Nm)
Rocker Arm Adjustment Screw	T-40
Rocker Arm Lock Nut	13 mm	60 in.lbs (6l6 Nm)
Spark Plug	5/8" mm Deept	180 in.lbs (20.0 Nm)
Starter Guard	_"	25 in-lbs (2.8 Nm)
Starter Motor	_" or T-40	140 in-lbs (15.8 Nm)
Starter Thru Bolts	5/16"	50in.lbs (5.6Nm)
Valve Cover	3/8"	55 in.lbs. (6.2 Nm)